General Specifications
GENERAL SPECIFICATIONS
| Application | Millimeters | Inches |
|---|---|---|
| Front Brake Rotors: | ||
| Discard Thickness | 22.00 | 0.87 |
| Lateral Runout (Installed) | 0.030 | 0.001 |
| Rotor Diameter | 256 | 10.07 |
| Rotor Thickness (New) | 24.00 | 0.95 |
| Thickness Variation | 0.01 | 0.0004 |
| Rear Brake Rotors: | ||
| Discard Thickness | 8 | 0.31 |
| Lateral Runout (Installed) | 0.030 | 0.001 |
| Rotor Diameter | 258 | 10.15 |
| Rotor Thickness (New) | 10.4 | 0.40 |
| Thickness Variation | 0.01 | 0.0004 |
| Master Cylinder: | ||
| Bore Diameter (Nominal) | 22.22 | 0.875 |
| Bore Diameter (Maximum) | 22.29 | 0.878 |
| Caliper: | ||
| Minimum Piston Diameter (Front) | 54.00 | 2.126 |
| Minimum Piston Diameter (Rear) | 32 | 1.260 |
| Wheel Cylinder Diameter: | ||
| Maximum | 20.7 | 0.815 |
| Nominal | 20.64 | 0.812 |