LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Aerio S, Automatic >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Manual Transmission) >> Repair Instructions >> Gear Shift Lever and Cable Removal and Installation >> Removal

Gear Shift Lever and Cable Removal and Installation: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove console box.
  2. Disconnect gear shift and select control cables from gear shift control lever assembly.
  3. Remove gear shift control cable guide nuts and gear shift lever assembly from body.
  4. Disconnect shift and select cables from transaxle.
  5. Remove E-rings, cable grommet and cable clamp, and then remove shift and select cables from body.
scientia non olet · About LEMON Manuals