Master Cylinder Assembly Disassembly and Assembly: Disassembly

1. [For vehicle not equipped with ABS] Remove piston stopper bolt (1).
   Fig 1: Removing Piston Stopper Bolt

   Courtesy of SUZUKI OF AMERICA CORP.
2. [For vehicle equipped with ABS] Push in primary piston (1) to remove secondary piston stopper pin (2) from master cylinder as shown.
   Fig 2: Removing Secondary Piston Stopper Pin

   Courtesy of SUZUKI OF AMERICA CORP.
3. Remove circlip (1).
4. Remove primary piston. Then remove secondary piston by blowing compressed air (2) into hole. Be cautious during removal as secondary piston jumps out.

Fig 3: Removing Circlip

Courtesy of SUZUKI OF AMERICA CORP.