Instrument Panel Removal and Installation: Installation

Reverse removal procedure noting the following.

• When installing each part, be careful not to catch any cable or wiring harness.
• Tighten steering support member support bolts to specified torque.

Tightening torque 

Steering support member support bolts (a): 23 Nm (2.3 kg-m, 17.0 lb-ft) 

Fig 1: Tightening Steering Support Member Support Bolts

Courtesy of SUZUKI OF AMERICA CORP.

• Install steering lower shaft referring to STEERING LOWER SHAFT REMOVAL AND INSTALLATION .
• Enable air bag system referring to ENABLING AIR BAG SYSTEM .