LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Aerio L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Testing and Inspection >> Output Shaft Speed Sensor Inspection

Output Shaft Speed Sensor Inspection

Output Shaft Speed Sensor Inspection
1. Disconnect negative cable at battery.
2. Disconnect output shaft speed sensor connector (2).





3. Check resistance between output shaft speed sensor (1) terminals.
Output shaft speed sensor resistance
Standard: 648 - 792 ohms at 20°C (68°F)


scientia non olet · About LEMON Manuals