LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2005 >> Aerio L4-2.3L >> Repair and Diagnosis >> Transmission and Drivetrain >> Sensors and Switches - Transmission and Drivetrain >> Sensors and Switches - A/T >> Transmission Speed Sensor >> Testing and Inspection >> Input Shaft Speed Sensor Inspection

Input Shaft Speed Sensor Inspection

Input Shaft Speed Sensor Inspection
1. Disconnect negative cable at battery.
2. Disconnect input shaft speed sensor connector (2).





3. Check resistance between input shaft speed sensor (1) terminals.
Input shaft speed sensor resistance
Standard: 387 - 473 ohms at 20°C (68°F)


scientia non olet · About LEMON Manuals