LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2004 >> XL-7 LX, 4WD, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Disc & Drum >> Overhaul >> Front Brake Caliper >> Disassembly

Front Brake Caliper: Disassembly

  1. Remove anti-noise shim, if equipped. Remove caliper piston boot retaining ring (if equipped) and boot. Place a narrow wooden block between piston and caliper that will allow piston to clear its bore and not be damaged by caliper when removed.
  2. Using low pressure compressed air, apply air into caliper brake line fitting hole to force piston out of caliper. Remove piston and wood block. Remove piston seal with small flat-blade screwdriver if necessary. Remove bleeder screw.
scientia non olet · About LEMON Manuals