Front Speaker And Rear Speaker Removal And Installation: Removal

Remove inside handle bezel (1).
Remove inside lock knob and door inside pull handle case fitting screw.

Fig 1: Removing Inside Handle Bezel
Courtesy of SUZUKI OF AMERICA CORP.
Remove door trim (1).
With inside handle bezel (2) tilted as shown in figure, turn door trim (1) 90° clockwise to remove it. And disconnect power window switch lead wire at coupler.

Fig 2: Removing Door Trim
Courtesy of SUZUKI OF AMERICA CORP.
Remove 3 speaker mounting screws (1).
Remove speaker (2) from door (3).
Disconnect speaker coupler from speaker.

Fig 3: Removing Speaker

Courtesy of SUZUKI OF AMERICA CORP.