Stoplight Switch
Loosen stoplight switch lock nut. Pull brake pedal up. Adjust stoplight switch position so clearance between end of switch thread and brake pedal contact is as specified. See STOPLIGHT SWITCH CLEARANCE table. Tighten lock nut.
STOPLIGHT SWITCH CLEARANCE
| Application | Clearance In. (mm) |
|---|---|
| Aerio | .02-.06 (0.5-1.5) |
| Esteem | .06-.08 (1.5-2.0) |
| Grand Vitara & Vitara | .06-.08 (1.5-2.0) |
| Swift | .06-.08 (1.5-2.0) |
| XL-7 | .06-.08 (1.5-2.0) |