LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 99 (Heater And Ventilation) >> Repair Instructions >> Blower Motor Relay Removal and Installation >> Inspection

Blower Motor Relay Removal and Installation: Inspection

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect battery positive (+) terminal to terminal (1) of relay.
  2. Connect battery negative (-) terminal to terminal (2) of relay.
  3. Check continuity between terminal (3) and (4).

    If there is no continuity, replace relay.

Fig 1: Checking Continuity Between Relay Terminals
G00757938Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals