LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Diagnosis - A/T) >> Diagnostic Information and Procedures >> Diagnostic Trouble Codes Clearance >> Diagnostic Trouble Codes Clearance Using SUZUKI Scan Tool

Diagnostic Trouble Codes Clearance Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC) (1).

    Special tool 

    1. (A): SUZUKI scan tool
    Fig 1: DTC Clearance Using Scan Tool
    G00758275Courtesy of SUZUKI OF AMERICA CORP.
  3. Clear DTC according to instructions displayed on SUZUKI scan tool. Refer to SUZUKI scan tool operator's manual for further details.
  4. After completing the clearance, turn ignition switch OFF and disconnected SUZUKI scan tool from data link connector (DLC).
scientia non olet · About LEMON Manuals