LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Diagnosis - A/T) >> Diagnostic Information and Procedures >> Diagnostic Trouble Codes Clearance >> Diagnostic Trouble Codes Clearance Using Monitor Connector

Diagnostic Trouble Codes Clearance Using Monitor Connector

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove steering column hole cover (1).
  2. Turn ignition switch ON.
  3. After 6 seconds or more, repeat connecting and disconnecting diagnosis switch terminal (3) and ground terminal (4) of monitor connector (2) 5 times at about 1 second interval within 10 seconds, using service wire.
  4. Check TCM that no malfunction DTC remains in memory of it.
Fig 1: DTC Clearance Using Monitor Connector
G00758276Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals