LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 95 (Diagnosis - A/T) >> Diagnostic Information and Procedures >> Diagnostic Trouble Codes Check >> Reading Diagnostic Trouble Codes Using SUZUKI Scan Tool

Reading Diagnostic Trouble Codes Using SUZUKI Scan Tool

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Turn ignition switch OFF.
  2. Connect SUZUKI scan tool to data link connector (DLC).

    Special tool 

    1. (A): SUZUKI scan tool
    Fig 1: Reading DTC Using Scan Tool
    G00758272Courtesy of SUZUKI OF AMERICA CORP.
  3. Read DTC according to instructions displayed on SUZUKI scan tool and write it down. Refer to SUZUKI scan tool operator's manual for further details.
  4. After completing the check, turn ignition switch OFF and disconnect SUZUKI scan tool from data link connector (DLC).
scientia non olet · About LEMON Manuals