Solenoid Valves (Shift Solenoid-A, Shift Solenoid-B, Shift Solenoid-E, TCC Solenoid, Pressure Control Solenoid-A, Pressure Control Solenoid-B, and Pressure Control Solenoid-C) Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
Remove removal procedure to install solenoid valves, noting the following points.
- For details of solenoid valves and their connectors installation, refer to Automatic Transmission Unit Assembly . Use new O-ring.
- For details of A/T oil pan installation, refer to Automatic Transmission Unit Assembly .
- Tighten exhaust No.1 pipe bolts & nuts and exhaust bracket bolts & nuts.
- Fill A/T fluid and check fluid level according to procedure described in A/T Fluid Change .
- Check for fluid leakage after warming up A/T.