LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 94 (Overhaul - A/T) >> Repair Instructions >> Pressure Control Solenoid Valves (Pressure Control Solenoid-A, Pressure Control Solenoid-B, Pressure Control Solenoid-C and TCC Solenoid Valve) >> Operation check >> Not Using Regulated DC Power Supply

Not Using Regulated DC Power Supply

WARNING: This page is about a different car, the 2004 Suzuki XL-7. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect pressure control solenoid valve (1) to battery (4) setting 21 W bulb (2) in between as shown in the figure.
  2. Check that valve (3) moves in arrow "A" direction.
  3. Disconnect pressure control solenoid valve (1) from battery (4) and check that valve (3) moves in arrow "B" direction as shown in the figure.
CAUTION: Set 21 W bulb in between, or pressure control solenoid valve will be burned out.
Fig 1: Disconnecting Pressure Control Solenoid Valve
G00761564Courtesy of SUZUKI OF AMERICA CORP.