LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 92 (Clutches - M/T) >> Repair Instructions >> Clutch Master Cylinder Disassembly and Assembly >> Disassembly

Clutch Master Cylinder Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2004 Suzuki XL-7 and 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove boot and then circlip (1) with piston (3) pushed in.
  2. Remove push rod (2) and blow compressed air gradually into hole for pipe connection to remove piston assembly, using care to prevent it from jumping out.
    Fig 1: Removing Piston Assembly
    G00761803Courtesy of SUZUKI OF AMERICA CORP.
scientia non olet · About LEMON Manuals