Manual Transmission Intermediate Case and Front Case (Location of Knock and Plug) Assembly

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Install knock pin (1) and plug (2) (sealant applied) to front case as shown in the figure.
"A": Sealant 99000-31110

Fig 1: Installing Knock Pin & Plug
Courtesy of SUZUKI OF AMERICA CORP.
Install knock pin (2) / ring pin (1) as shown in the figure.

Fig 2: Installing Knock Pin/Ring Pin
Courtesy of SUZUKI OF AMERICA CORP.