LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 84 (Disc & Drum) >> Removal & Installation >> Master Cylinder Assembly >> Removal

Master Cylinder Assembly: Removal

WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove air intake hose and air cleaner.
  2. Disconnect brake fluid level sensor connector. See Fig 1 .
  3. Remove reservoir cap assembly
  4. Remove reservoir.
  5. Remove brake fluid level sensor.
  6. Remove reservoir hose.
  7. Disconnect brake lines.
  8. Remove proportioning valves (if equipped).
  9. Remove O-rings.
  10. Remove master cylinder.
Fig 1: Exploded View Of Master Cylinder Assembly & Brake Booster
G00313509Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals