Brake Pedal Free Play
WARNING: This page is about a different car, the 2003 Mitsubishi Outlander. However, it is still accessible from the selected car via links, so may be relevant.
- Turn ignition switch to LOCK (OFF) position. Depress brake pedal 2 or 3 times. After eliminating vacuum in brake booster, press pedal down by hand, and confirm that the amount of movement before resistance is met (free play) is 0.12-0.31" (3-8 mm).
- If brake pedal free play is not as specified, check the following, and adjust or replace if necessary:
- Excessive play between the brake pedal and the clevis pin, or between the clevis pin and the brake booster operating rod.
- Brake pedal height
- Stop light switch adjustment, etc.