LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 81 (Disc & Drum) >> Adjustments >> Brake Booster Push Rod (Brake Pedal Height)

Brake Booster Push Rod (Brake Pedal Height)

WARNING: This page does not describe the selected car, but rather 6 other vehicles, including the 2004 Suzuki XL-7, 2004 Suzuki Vitara, 2004 Suzuki Grand Vitara, 2003 Suzuki XL-7, and 2003 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove vacuum brake booster from vehicle. See POWER BRAKE BOOSTER  under REMOVAL & INSTALLATION. Measure distance between booster mounting surface (with gasket on) and center of clevis pin hole. See Fig 1. Adjust push rod if not within specification. See BOOSTER PUSH ROD LENGTH  table.

BOOSTER PUSH ROD LENGTH

Application In. (mm)
Grand Vitara, Vitara & XL-7 4.31-4.35 (109.5-110.5)
Fig 1: Adjusting Push Rod Clevis
G96H19395Courtesy of SUZUKI OF AMERICA CORP.