Alternator Belt
WARNING: This page is about a different car, the 2004 Suzuki XL-7, 2004 Suzuki Grand Vitara, 2003 Suzuki XL-7, and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative (-) cable at battery.
- Inspect belt for cracks, cuts, deformation, wear and cleanliness. If any defect exists, replace belt.
- Check belt tension. If belt is too tight or too loose, adjust it to specification by adjusting alternator position. Belt tension ("a") should be .35-.43" (9-11 mm) under 22 Lbs. (100 N) of pressure for used belt and .28-.35" (7-11 mm) under 22 Lbs. (100 N) of pressure for new belt. See Fig 1 and DRIVE BELT SPECIFICATIONS .
- Tighten alternator adjusting bolt and pivot bolts.
- Connect negative cable to battery.