LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 71 (Specifications & Procedures) >> Adjustments >> Turning Angle Inspection

Turning Angle Inspection

WARNING: This page is about a different car, the 2004 Suzuki Grand Vitara and 2003 Suzuki Grand Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Check turning angle with turning radius gauge. See Fig 1. If turning angle is not correct, check if right and left tie rods are equal in length. Make any necessary adjustments. If tie rods lengths are changed during adjustment, re-check toe-in measurement. See TOE-IN ADJUSTMENT .

Fig 1: Measuring & Adjusting Turning Angle
G00276150Courtesy of SUZUKI OF AMERICA CORP.