LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 6 (Engine Controls - Self-Diagnostics - 2.2L) >> Diagnostic Tests >> DTC P0336: Crankshaft Position Sensor Circuit - Range/Performance >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2002 Isuzu Rodeo Sport and 2002 Isuzu Rodeo. However, it is still accessible from the selected car via links, so may be relevant.

Check for poor connection at PCM. Inspect harness connectors for backed-out terminals, improper mating, broken locks, improperly formed or damaged terminals and poor terminal connection. Observe a voltmeter connected to 58X CKP sensor reference circuit at PCM harness connector while moving all related harnesses and connectors. A change in voltage indicates fault location. Reviewing FAILURE RECORDS vehicle mileage since last failure may help determine how often condition that caused failure occurred, and may assist in diagnosing problem.

scientia non olet · About LEMON Manuals