LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 5 (Engine Controls - Self-Diagnostics) >> Malfunction Indicator Lights >> Malfunction Indicator Light On Steady >> Diagnostic Aids

Diagnostic Aids

WARNING: This page is about a different car, the 2002 Isuzu Trooper. However, it is still accessible from the selected car via links, so may be relevant.

Check for poor connection, rubbed-through wire insulation or a broken wire inside insulation. Inspect harness connectors for backed-out terminals, improper mating, broken locks, improperly formed or damaged terminals, poor terminal-to-wire connection, and damaged harness. If harness appears to be okay, use DVOM to observe suspect driver circuits at PCM while moving connectors and harnesses. See WIRING DIAGRAMS article. A change in display will indicate location of fault. Check for poor, loose or corroded terminals or harness connectors in instrument cluster harness.

If MIL turns off when PCM harness connectors are disconnected, MIL driver wiring is not at fault. If MIL driver circuit tests okay, instrument cluster is faulty.

scientia non olet · About LEMON Manuals