Removal (Grand Vitara & XL-7)
WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
- Relieve fuel pressure in fuel feed line referring to FUEL PRESSURE RELIEF .
- Remove throttle body intake collector referring to THROTTLE BODY & INTAKE MANIFOLD .
- Disconnect fuel feed hose (1) and fuel return hose (2). See Figure .
- Disconnect vacuum hose (4) and fuel return hose from fuel pressure regulator (5). See Figure .
- Remove fuel feed pipe (8) and fuel connect pipe (7) from delivery pipes (6) (right and left).
- Disconnect connector (3) from each injector. See Figure .
- Remove delivery pipes (1) (right and left) from intake manifold. See Figure .
- Remove fuel injector(s).
CAUTION:
A small amount of fuel may be released when it is from delivery pipe. Place a shop cloth under delivery pipe so that released fuel is absorbed in it.