Removal (Vitara)
WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
To avoid danger of being burned, do not touch exhaust system when system is hot. Oxygen sensor removal should be performed when system is cool.
- Disconnect negative cable from battery.
- Remove connector from bracket (3) and disconnect coupler of H02S. See Figure .
- Remove exhaust manifold upper cover (2), if necessary. See Figure .
- Hoist vehicle when removing H02S-2 (with WU-TWC).
- Remove H02S-1 from exhaust manifold.CAUTION: Be careful not to expose it to excessive shock. It may cause damage to sensor inside.