Removal (Grand Vitara & XL-7)
WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
- Hoist vehicle.
- Remove EVAP canister (1) with its bracket (2). See Figure .
- Disconnect tank hose, purge hose and refuel vapor control valve hose from EVAP canister. For quick joint, disconnect it as follows:
- Remove mud or rust around joint by blowing compressed air, and push joint fully in arrow direction.
- Disconnect hose joint while joint lock is unlocked by pushing both sides of joint.
- Remove EVAP canister bolts.
- Disconnect air valve hose from EVAP canister.