LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Removal & Installation) >> Emission Systems & Sub-Systems >> EVAP Canister >> Removal (Aerio)

Removal (Aerio)

WARNING: This page is about a different car, the 2003 Suzuki XL-7, 2003 Suzuki Vitara, 2003 Suzuki Grand Vitara, and 2003 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
  1. Hoist vehicle. Disconnect purge hose (1), vent valve hose (2), and refuel vapor control valve hose (3) from pipes. See Figure . For quick joint, disconnect as follows:
    • Remove mud or dust around joint by blowing compressed air, and push joint fully in arrow direction (a).
    • Disconnect hose joint (while joint lock is unlocked) by pushing both sides of joint (b).
  2. Disconnect vent valve wire harness connector.
  3. Remove EVAP canister with bracket (4) from vehicle.
  4. Remove EVAP canister from bracket.
scientia non olet · About LEMON Manuals