Removal & Installation

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.

Park/Neutral position switch is located on transaxle. Remove bolts and remove Park/Neutral position switch. See Fig 1-Fig 4 . To install, reverse removal procedure. Adjust Park/Neutral position switch. See PARK/NEUTRAL POSITION SWITCH (AUTOMATIC TRANSMISSION) in ON-VEHICLE ADJUSTMENTS article. Tighten Park/Neutral position switch bolts to specification. See TORQUE SPECIFICATIONS .

Fig 1: Removing & Installing Park/Neutral Position Switch (Diamante & Outlander)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 2: Removing & Installing Park/Neutral Position Switch (Eclipse, Galant & Lancer)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 3: Removing & Installing Park/Neutral Position Switch (Montero)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.

Fig 4: Removing & Installing Park/Neutral Position Switch (Montero Sport)

Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.