LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Removal, Overhaul & Installation) >> Sensors & Switches >> Fuel Level Sensor >> Removal (Lancer & 2WD Outlander)

Removal (Lancer & 2WD Outlander)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
CAUTION: On Outlander, ensure gauge unit and float of fuel gauge unit are not damaged when removing or installing.

Fuel level sensor is part of fuel gauge. Remove rear seat cushion. See Fig 2, Fig 3 or Fig 4 . Using a flat-blade screwdriver, pry off access hole cover. See Fig 1. Disconnect harness connector. See Fig 5. Unscrew mounting nuts and remove fuel level sensor. See Fig 6.

Fig 1: Removing Access Hole Cover (Lancer & Outlander)
G00248075Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Exploded View Of Rear Bench Seat (Lancer)
G00240655Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 3: Exploded View Of Rear Split Seat (Lancer)
G00240665Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 4: Exploded View Of Rear Split Seat (Outlander)
G00248077Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 5: Removing Fuel Level Sensor Or Fuel Temperature Sensor Nuts (Lancer & Outlander)
G00240658Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 6: Removing Fuel Level Sensor Or Fuel Temperature Sensor (Lancer & Outlander)
G00248076Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals