LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 41 (Removal, Overhaul & Installation) >> Sensors & Switches >> Fuel Level Sensor >> Removal & Installation (Montero)

Removal & Installation (Montero)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove second (middle) seat. See Fig 1. Remove access hole cover (upper side) and packing located under second seat. Remove rear scuff plate, anchor bolts for outer seat belt (second) and mounting screws of lower quarter trim. Pull back carpet. Remove access hole cover and packing located between front seat and second seat. Disconnect harness connector. See Fig 2. Unscrew mounting nut to remove fuel level sensor.
  2. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .
Fig 1: Removing Second Seat (Montero)
G00240622Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Removing Fuel Level Sensor (Montero)
G00240623Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
scientia non olet · About LEMON Manuals