Installation (Lancer & 2WD Outlander)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
Install fuel level sensor. Tighten fasteners to specification. See TORQUE SPECIFICATIONS . Connect harness connector. Apply 3M™ 8513 Grommets Windshield Sealer (Black) to contact surfaces of access hole cover and floor pan, and install access hole cover. See Fig 1. Install rear seat cushion assembly making sure that rear seat cushion fits into rear seat hook securely. See Fig 2.