Removal & Installation (Diamante)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
Remove drive belt. See Fig 1. Remove tensioner pulley. Remove crankshaft bolt washer and pulley. Remove generator. Remove 3 timing belt covers. Remove engine support bracket. Remove crankshaft position sensor. To install, reverse removal procedure. Tighten fasteners to specification. See TORQUE SPECIFICATIONS .