Installation (Lancer)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
- To install crankshaft pulley, clean holes on crankshaft. Apply engine oil at contact surfaces and threads on crankshaft bolts.
- To install front engine mount, tighten bolts and nuts finger tight. Lower vehicle to the ground in order to load full weight of engine and transaxle on vehicle body. Tighten bolt and nuts to specification. See TORQUE SPECIFICATIONS . To complete installation, reverse removal procedure.