Removal & Installation (Diamante)
WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
Raise and support vehicle. Locate EVAP canister, under left rear corner of vehicle. Label and disconnect vent, purge and vapor hoses from EVAP canister. See Fig 1. Remove EVAP canister mounting nuts and EVAP canister. To install, reverse removal procedure.