LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 40 (Engine Controls - System & Component Testing) >> Motors, Relays & Solenoids >> Solenoids >> Ventilation Solenoid (Diamante, Montero, Montero Sport & Outlander)

Ventilation Solenoid (Diamante, Montero, Montero Sport & Outlander)

WARNING: This page does not describe the selected car, but rather 7 other vehicles, including the 2003 Mitsubishi Outlander, 2003 Mitsubishi Montero Sport, 2003 Mitsubishi Montero, 2003 Mitsubishi Lancer, and 2003 Mitsubishi Galant. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect a hand vacuum pump to nipple (A) of the solenoid. See Fig 1-Fig 7 .
  2. Check air tightness by applying a vacuum with voltage applied directly from the battery to the evaporative emission ventilation solenoid and without applying voltage. When voltage is applied, the vacuum should be maintained. When voltage is absent, the vacuum should leak.
  3. Measure the resistance between the terminals of the solenoid. Standard value: 17-21 ohms @ 68°F (20°C).
  4. Replace the solenoid if resistance is out of specification.
Fig 1: Locating Ventilation Solenoid (Diamante - External)
G00229881Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 2: Locating Ventilation Solenoid (Diamante - Internal)
G00229882Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 3: Locating Ventilation Solenoid (Montero)
G00229883Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 4: Locating Ventilation Solenoid, External (Montero Sport)
G00229884Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 5: Locating Ventilation Solenoid, Internal (Montero Sport)
G00229885Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 6: Locating Ventilation Solenoid, External (Outlander)
G00229886Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.
Fig 7: Locating Ventilation Solenoid, Internal (Outlander)
G00229887Courtesy of MITSUBISHI MOTOR SALES OF AMERICA.