LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 26 (Engine Controls - Removal, Overhaul & Installation) >> Fuel System >> Tank Pressure Control Valve >> Removal & Installation

Removal & Installation

WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.

Remove fuel tank. See appropriate procedure under FUEL TANK & FUEL PUMP  . Clean dirt and grime from fuel tank around Tank Pressure Control (TPC) valve. See Fig 1 . Remove fuel hose clamps and hoses from TPC valve, and remove TPC valve. Install TPC valve so that vapor flows from Orange or White nozzle side towards EVAP canister. To finish installation, reverse remaining removal procedure.

Fig 1: Locating Tank Pressure Control Valve
G00163684Courtesy of SUZUKI OF AMERICA CORP.