Removal & Installation (Vitara, Grand Vitara & XL-7)
WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
To remove, disconnect negative cable from battery and MAP sensor connector from MAP sensor. Remove MAP sensor from intake manifold. To install, confirm that vacuum passage on intake manifold is free from clogs. Apply engine oil to O-ring of MAP sensor and install MAP sensor to intake manifold. Connect connector to MAP sensor securely.