Removal & Installation (Esteem 1.6L)
WARNING: This page is about a different car, the 2002 Suzuki XL-7, 2002 Suzuki Vitara, 2002 Suzuki Grand Vitara, 2002 Suzuki Esteem, and 2002 Suzuki Aerio. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect Idle Air Control (IAC) valve and throttle body harness connectors. Remove throttle body from intake manifold. See appropriate procedure, under THROTTLE BODY & INTAKE COLLECTOR . Remove IAC valve from throttle body. Install "O" ring seal to IAC valve. Always replace "O" ring seal with NEW part. Install IAC valve to throttle body. Tighten screws to specification. See TORQUE SPECIFICATIONS . To finish installation, reverse remaining removal procedure.