Heater Unit Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Install heater unit by reversing removal procedure, noting the following items.
- When installing each part, be careful not to catch any cable or wiring harness.
- When installing steering column assembly referring to STEERING COLUMN REMOVAL AND INSTALLATION .
- Install control cables referring to "HEATER CONTROL CABLES REMOVAL AND INSTALLATION: ".
- Fill engine coolant to radiator.
- Enable air bag system, if equipped. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
- Evacuate and charge system. Refer to OPERATION PROCEDURE FOR CHARGING A/C WITH REF .