Heater Mode Control Actuator Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative (-) cable at battery.
- Disable air bag system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove column hole cover.
- Disconnect mode actuator coupler (1).
- Disconnect mode actuator rod (2) from heater unit.
- Remove heater mode control actuator from heater unit by removing its mounting screw (3).