Heater Mode Control Actuator Inspection

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Connect battery voltage (+) to terminal "b" and (-) to terminal "a".
Connect each terminal listed below to terminal "a" (negative (-) terminal of battery) as listed below and check operates at proper position with the blower fan operates.

Heater mode control actuator specification

Fig 1: Identifying Heater Mode Control Actuator Specification Chart

Courtesy of SUZUKI OF AMERICA CORP.

Fig 2: Identifying Heater Mode Control Actuator

Courtesy of SUZUKI OF AMERICA CORP.