Heater Control Lever Assembly Removal and Installation: Removal
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect negative (-) cable at battery.
- Disable air bag system. Refer to DISABLING & ACTIVATING AIR BAG SYSTEM .
- Remove mode control switch, refer to "HEATER MODE CONTROL SWITCH REMOVAL AND INSTALLATION: ".
- Remove glove box.
- Disconnect control cables (3) from blower motor unit (2) and heater unit (1).
- Disconnect heater blower motor switch (1) connector at coupler.
- Remove heater control lever assembly (2).