Heater Control Cables Removal and Installation: Installation
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Install in reverse order of removal procedure and fix each cable with clamp in position referring to "HEATER CONTROL LEVER ASSEMBLY REMOVAL AND INSTALLATION: ".
- After installing control cables be sure that control levers move smoothly and stop at proper position.
- Move control lever (1) to FRESH position (2), then push lever fully in arrow direction (4) and fix cable (3) with clamp in position as shown in the figure.