Input Shaft Bearing Retainer and Oil Seal Disassembly and Assembly: Assembly
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
Install new oil seal (2) to bearing retainer (1) by using special tool as shown in the figure. Apply grease to oil seal lip.
: Grease 99000-25010
Special tool
(A): 09913-75821
(B): 09924-84510-004
Oil seal installing position
"a": 12.2 - 13.2 mm (0.48 - 0.52 in.)