Countershaft and Reverse Idle Gear Disassembly and Assembly: Disassembly

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Remove circlip (1) from countershaft.
Special tool

(A): 09900-06107

Fig 1: Removing Circlip From Countershaft
Courtesy of SUZUKI OF AMERICA CORP.
Pull out bearing (3) from counter shaft by using bearing puller (4), press (1) and rod (diameter approx. 22 mm (0.87 in.)) (2).

Fig 2: Pulling Out Bearing From Counter Shaft Using Bearing Puller, Press And Rod

Courtesy of SUZUKI OF AMERICA CORP.