LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 175 (Diagnosis & Overhaul) >> Automatic Transmission >> Diagnostic Information and Procedures >> Shift Lock (Solenoid) Manual Release System Inspection

Shift Lock (Solenoid) Manual Release System Inspection

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Shift Lock can be manually released by the following procedure.

  1. Remove access hole cover (1) by unfastening screw (2).
  2. Turn ignition key to "ACC" position and move shift lock solenoid rod (or manual release plate) toward rear side of vehicle by using flat end rod or the like.
  3. In this state, select lever (3) can be moved to any range or position.
Fig 1: Inspecting Shift Lock (Solenoid) Manual Release System
G00797854Courtesy of SUZUKI OF AMERICA CORP.