Diagnostic Trouble Codes Confirmation Procedure
WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
WARNING:
- When performing a road test, select a place where there is no traffic or possibility of a traffic accident and be very careful during testing to avoid occurrence of an accident.
- Road test should be carried out with 2 persons, a driver and a tester, on a level road.
- Connect scan tool to DLC with ignition switch OFF.
- Clear DTC, pending DTC and freeze frame data in PCM memory by using scan tool.
- Start engine.
- Increase vehicle speed to about 30 km/h (19 mph) or more in "D" range and is in "2H" position.
- Keep driving at above vehicle speed for 30 seconds.
- Stop vehicle and shift transfer lever to "4L" position with A/T selector lever is in "P" range
- Increase vehicle speed to about 25 km/h (15 mph) or more in "D" range and is in "4L" position.
- Keep driving at above vehicle speed for 30 seconds.
- Stop vehicle and check pending DTC and DTC by using scan tool.