LEMON Manuals: Even more car manuals for everyone
Home >> Suzuki >> 2001 >> XL-7 Limited >> Repair and Diagnosis >> External Pages >> Different car >> Section 174 (Abs) >> Repair Instructions >> G Sensor Removal and Installation >> Installation

G Sensor Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect connector to sensor securely.
  2. Install sensor with bracket and parking lever assembly (2) onto floor so that arrow mark directs vehicle forward (1).

    Tightening torque 

    Parking lever assembly mounting bolt (a): 23 N.m (2.3 kg-m, 17.0 lb-ft) 

    Fig 1: Tightening Bolt With Torque Specification
    G00797201Courtesy of SUZUKI OF AMERICA CORP.
  3. Install rear console box.