Rear Brake Shoe Removal and Installation: Installation

WARNING: This page is about a different car, the 2004 Suzuki Vitara. However, it is still accessible from the selected car via links, so may be relevant.

Assemble parts as shown in reverse order of removal.

Fig 1: Installing Parking Brake Shoe Lever Into Brake Shoe
Courtesy of SUZUKI OF AMERICA CORP.
Install shoe hold down springs (6) by pushing them down in place and turning hold down pins (5).
Install adjuster (2), and upper shoe return spring (1).
Install adjuster lever (3), adjuster spring (4) and strut spring (7).

Fig 2: Installing Adjuster Lever, Adjuster Spring And Strut Spring
Courtesy of SUZUKI OF AMERICA CORP.
For procedure hereafter, refer to "REAR BRAKE DRUM REMOVAL AND INSTALLATION: "